Instruction manual

9
CLICK HERE TO GO THE INDEX
Canon Cartridges
BCI-21 Black & 24 Black
BCI-21 Color & 24 Color
1. Use a knife to remove the top of cartridge(s).
2. Use the included eyelet screw to enlarge the lling hole(s) in the top of the cartridge(s).
3. Connect the needle to the syringe and ll with ink.
4. Insert the syringe into the correct lling hole, (See diagram below for lling hole color)
and push into the center of the cartridge. Note: You may feel a slight pressure because
the cartridge contains a sponge.
5. Inject up to 5 ml. of ink, per color, into the cartridge.
6. Reposition the top and secure with a piece of tape.
7. Rinse the syringe with water and dry between each color lling or store for future use.
8. Reinsert the cartridge(s) and run a cleaning cycle as per printer instructions.
Black
Filling Hole
Magenta
Filling Hole
Cyan
Filling Hole
Yel l ow
Filling Hole
© All rights reserved, Easy Group, LLC. Version 4.2
All trademarks are property of their respective owners. Uni-Kit
®
has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.
All logos and brand names shown here are used for identication purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.