Instruction manual
8
CLICK HERE TO GO THE INDEX
Brother Cartridges
LC61C, LC61M, LC61Y, LC61BK,
LC65BK, LC65C, LC65Y, LC65M
LC71C, LC71M, LC71Y, LC71BK
LC75C, LC75M, LC75Y, LC75BK,
LC79BK, LC79C, LC79Y, LC79M
LC103BK, LC103C, LC103M, lC103Y,
LC105BK, LC105C, LC105M, LC105Y
1.
Place the cartridge over a towel, or paper towel.
2.
Remove the bottom portion of the cartridge by pushing in the small tabs that
hold it in place. In order to do this, you will need a small at head screwdriver.
3.
Once the bottom portion is removed, nd the Ink nozzle. Fill the syringe with
about 10ml of ink. Place the syringe into the ink nozzle just as shown in the
image to the le.
4.
Find the Air Nozzle. Before attempting to push the ink into the cartridge you
must keep in mind that air must be released via the air nozzle. In order to do
this, push the tab sticking out of the air nozzle in while you ll the cartridge.
5.
Rell slowly. Ink can spill out of the air nozzle if its pushed in to quickly. Fill
slow, and watch the ink as it lls through the see through plastic.
6.
Once your done, release the air nozzle, and remove the syringe from the ink
nozzle.
7.
Place the bottom cover back on, and your cartridge is now ready for use.
Air Nozzle
Ink Nozzle
© All rights reserved, Easy Group, LLC. Version 4.2
All trademarks are property of their respective owners. Uni-Kit
®
has no association with any of the manufacturers listed here such as Hp, Epson, Lexmark, Xerox, etc.
All logos and brand names shown here are used for identication purposes only. It is illegal to reproduce these instructions without written licensing consent from Easy Group LLC.