Operating instructions

Connectingto a ComputerUsinga DV(IEEE1394)Cable

You can transfer recordings to a computer equipped with a DV (IEEE1394)terminal or

IEEE1394capture board (optional software required).

__ IEEE1394(DV)

terminal Commerciallyavailable DV cable

H O Do not disconnect the DV cable, or turn off the camcorder or computer while

data is being transferred to the computer

O Operation may not work correctly depending on the software and the

specifications!settings of your computer

O We recommend powering the camcorder from a household power source

while it is connected to the computer

O Refer also to the instruction manual of the computer

O Optional software required Refer also to the instruction manual of the

software.

O _ _ For transferbng recordings from a memory card to the

computer using a USBcable, see p 129.

Windows XP users can use the software on the supplied DV NETWORK SOLUTION

DISKto perform videoconference and file transfer over the Internet, or upload files

from the computer to the memory card and use the camcorder as card reader_vriter.

The available functions depend upon the camcorder model and the networking

environment. For details, refer to the DV NETWORK SOLUTION DISK Software

Instruction Manual.

!_! _amma

O Do not disconnect the DV cable, remove the memory card or turn off the

camcorder or computer while data is being transferred to the computer (while

the camcorder's card access indicator is flashing) Doing so may damage the

memory card's data

O The image flies on your memory card and the image flies saved on the hard

disk drive of your computer are your valuable, original data flies. If you wish to

use _magefiles on your computer, be sure to make copies of them first,

retaining the original