Operating instructions

7. Press the STOP • button on the wireless controller

to stop dubbing.

Audio device: Stop playback

Set the zero set memory at the end of the scene you wish to dub audio. The

camcorder will automatically stop audio dubbing at that point

You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust

the balance of both sounds,

12bit AUDIO

OUT button

.... [,00,0s,, I l,,0,t,00,o..,,,o,

(L[344)

:_ 1. Open the menu and select [AUDIO SET UP[. Select [12bit AUDIO OUT],

select a setting and close the menu.

• STEREOt: Playsback the original sound.

• STEREO2: Playsback the added sound.

• MIX/FIXED: Playsback stereo 1 and stereo 2 in the same level

• MIX/VARt : Playsback stereo 1 and stereo 2. The mix balance can be adjusted

2. If yOU have selected [MIX/VARI.], adjust the mix level: Open the menu

and select [AUDIO SET UP]. Select [MIX BALANCE], adjust the balance

with the selector dial and close the menu.

Turn the selector dial down to increasethe volume of Stereo 1 and up to increasethe

volume of Stereo 2

O The camcorder resets to [STEREO1] when you turn the camcorder off

However; the mix balance is memorized by the camcorder

O You can also press the t 2bit AUDIO OUT button on the wireless controller to

select the audio output. However; the mix balance can only be adjusted in the

menu.