Operating instructions

Replacing Existing Scenes (AV Insert) []
You can insert and replace images/audio on the tape of the camcorder with
images/audio from other video devices connected via AV terminal or DV terminal.
Sceneto be inserted
Playback tape
Insertstart Insertend
Tape in the
camcorder
before inserting
Inserted scene
Tape in the
camcorderafter
inse_ing
mU,
.$
O Make sure that "_" is not displayed on the screen If "_" is displayed, change
the setting ([_ 39)
O You cannot insert from a TV program when the synchronized signals are
distorted
Camcorder:
O Use only tapes recorded in SPmode.
O AV insert will stop if the camcorder detects a blank section or a section not
recorded in SP mode on the tape
Connected device:
O Use only tapes without blank sections
O AV insert may not work correctly if the tape has a blank section or changes ,]
the recording mode.
O AV insert cannot be performed when the quality of the recording _spoor. or
during special playback such as fast forward, rewind, playback pause, slow
playback etc
94