Operating instructions

Converting Analog Signals into Digital [] []

Signals (Analog.Digital Converter)

_] By connecting the camcorder to a VCR or 8mm video camcorder, you can convert

analog video/audio signals to digital signals and output the digital signals via the DV

terminal The DV terminal serves asoutput terminal only.

H () Headphones cannot be used during analog-digital conversion.

0 Unload the tape from the camcorder

0 Turn off all devices before starting the connections.

0 Depending on the signal sent from the connected device, the conversion from

analog to digital signals might not work properly (e.g, signals that include

We recommend powering the camcorder from a household power source

Connecting _he D,_ice_

This illustration shows how to connect using a S-video cable You can also connect the

yellow plug of the stereo video cable to the VIDEO terminal. Refer also to the

instruction manual of the connected device.

<_ Signalflow

S-150S-videoCable(optional)

<_ Signalflow

STV-250NStereo Video

Cable(supplied)

sig_flow

CommerciallyavailableDV cable

OUTPUT

"IF.:_:SlSl_VIDEO

(_ VIDEO

J_l