Operating instructions

Audio Recording [] []

Cb_ngJng,_ Audi_ Mod_

You can record sound in two audio modes--16-bit and 12-bit. The 12-bit mode records

sound on two channels (stereo 1), leaving 2 channels free (stereo 2) for adding new

sound later. Select the 16-bit mode for higher sound quality.

................................................

, .¢ /

Open the menu and select [AUDIO SET UP]. Select [AUDIO MODE], set it to

[16bit] and close the menu.

"16 bW' appears for approximately 4 seconds.

For adding new sound, seeAudio Dubbing (k]_ 96)

Recording witbanE_na! MicmphQne

You can use an external microphone for

recording. Almost all stereo microphones with

a plug diameter of 0.14 inch (3.5 ram) can be

connected to the MIC terminal Use a

microphone with a built-in power supply

(condenser microphone)

0 The audio level differs from that of the built-in microphone

0 Be careful with long microphones as they may appear in the picture

0 _ See also Using the DM-50 Microphone (_ 74)

_ind 5€_n .....

You can reduce the wind noise when recording in windy places.

Open the menu and select [AUDIO SET UP]. Select [WIND SCREEN], set it

to [ON] and close the menu.

"WS ON" appears when you turn the wind screenon.