Operating instructions

Changing the Remote Sensor Mode [] []
Two remote sensor modes and an off setting are available to prevent interference
from other Canon wireless controllers being used nearby.
Turning the Remote 5_ns_ Qff
,,,uEsysT ° 0 °oTE...,Ol
(_[344)
Open the menu and select [SYSTEM]. Select [WL
REMOTE], set it to [OFF (l_(_] and close the menu.
[(I,(_]] appears
Changing th_ RemQt_ 5_ M_d_
sYsT ° 0 °oTE...0Ol
_ r
MENU
]1
1. On the camcorder, open the menu and select
[SYSTEM]. Select [WL REMOTE], set it to [(_(Z) 2] and
close the menu.
The selected mode appears for 4 seconds.
2. On the wireless controller, press and hold the
REMOTE SET button. Set the mode to the same of
the camcorder. Press the ZOOM T button for mode 2.
Keep the button pressed for over 2 seconds.
If you have set the camcorder to mode 1, pressthe ZOOM W
button for mode 1
m
c
0 The wireless controller returns to mode t when you replace the batteries
Change the mode if necessary
0 Make sure that camcorder and wireless controller are set to the same mode
Display the camcorder's mode by pressing any button on the wireless controller
(except of the REMOTE SETbutton) and set the wireless controller's mode to
the same mode Change the batteries if the wireless controller still does not
work.
49