Operating instructions

_ Memory Card Related Messages
Message Explanation
NO CARD Memory card not is inserted into the camcorder.
THE TAPE IS SET FOR SD Memory Card is set for erasure prevention. Replace the
ERASURE PREVENTION card or change the position of the protect switch.
NO iMAGES No images are recorded on the memory card.
CARD ERROR A memory card error occurred. The camcorder cannot record
or play hack the image.
The error may be temporary. If the message disappears after
4 seconds and _flashes red, turn the camcorder off, remove
the card and reinsert the card. Ift_ changes to green, you
can continue recording/playback.
CARD FULL NO remaining capacity on the memory card. Replace with
another card or erase images.
NAMING ERROR File or folder number has reached the maximum value.
UNIDENTIFIABLE image is recorded in a not compatible JPEG format or
IMAGE another format not compatible with the camcorder, or the
image file is corrupted.
_PRINT ORDER ERROR YOU attempted to set more than 200 still images in the print
order.
THIS IMAGE CANNOT Some analog images cannot be recorded on the memory
BE RECORDED card depending on the signal.
100
100
111
100
115
102
111
116
106
4
m
139