Operating instructions

List of Messages

Message Explanation _[_

SET THE TIME ZONE, You have not set the time zone, date and time, This message 25

DATE AND TiME appears each time you turn the power on until you set the

time zone, date and time_

CHANGE THE Battery pack is exhausted_ Replace or charge the battery 16

BATTERY PACK pack_

THE TAPE IS SET FOR Cassette is protected. Replace the cassette or change the 23

ERASURE PREVENTION _osition of the protect switch_

REMOVE THE Camcorder stopped operating to protect the tape. Unload 22

CASSETTE and reload the cassette_

CHECK THE DV INPUT DV cable is not connected, or the connected digital device is go

turned off_

CONDENSATION HAS Condensation has been detected in the camcorder_ 143

BEEN DETECTED

TAPE END Tape reached the end_ Rewind the tape or replace the 22

cassette_

CHECK THE CASSETTE You attempted to perform audio dubbing or AV insert on a 54

[REC MODE] tape recorded in a mode other than the SP mode.

CHECK THE CASSETTE You attempted to perform audio dubbing on a tape 96

[AUDIO MODE] recorded in 16-bit or 12-bit 4_channel sound.

CHECK THE CASSETTE You attempted to perform audio dubbing or AV insert on a 94

[BLANK] tape with a b_ank sectiom

COPYRIGHTPROTECTED You attempted to play back a copyright protected tape. 91

PLAYBACK ISRESTRICTED

PROTECTED DUBBING appear when an anomalous signal is received during analog

RESTRICTED line-in recording, or during analog-digital conversion of a

138