Operating instructions

F
Creating a Start.up Image
You can create a start-up image using a still image on the memory card or a sample
start-up image provided on the DiGiTAL VIDEO SOLUTION DISK and save it as [MY
IMAGE]
O Make sure to insert a memory card with enough remaining capacity
O Before you create a start-up image, you need to record a still image on the
memory card
O Retain the original data of the still image you have set as the start-up _mage on
your computer or removable disk.
...............................................................................................................................
Record a still image on the memory card.
OR
Upload a still image from your computer to the memory card using the
software in the DIGITAL VIDEO SOLUTION DISK.
For instruction on how to upload a still image to the memory card, refer to Adding Still
Images from Your Computer to the Memory Card in the DIGITALVIDEO SOLUTIONDISK
Software Instruction Manual
.....................................................................
1. Open the menu.
2. Select [MY CAMERA].
_ 3. Select [CREATE START-UP IMAGE].
[SETTHISAS START-UPiMAGE?], [YES]and [NO] appears
_ 4. Select a still image with the CARD +1- buttons and select [YES].
[OVERWRITEMY IMAGE?],IYES] and [NO] appears.
t¢
._ 5. Select [YES].
The still image will be saved, and the imagethat was saved to [MY iMAGE] is erased