User`s guide

Customizing Mail Box Settings
8-32
8
Customizing Settings
3 Press [Yes].
To cancel storing the currently displayed settings as the Standard Scan Settings, press [No].
The message <Stored in memory.> appears for approximately two seconds on the touch panel
display.
The displayed settings are stored as the Standard Scan Settings.
NOTE
The settings displayed are the currently set scan settings. Press [ ] or [ ] to display any scan
settings that do not fit into the display area.
4 Press [Done].
Initializing the Standard Scan Settings
You can restore the Standard Scan Settings to their default settings.
1 Press ➞ [Mail Box Settings] ➞ [Standard Scan Settings].
2 Press [Initialize].
3 Verify the settings ➞ press [Yes].
To cancel initializing the Standard Scan Settings, press [No].
The message <Initialized.> appears for approximately two seconds on the touch panel display.
The Standard Scan Settings are initialized.
4 Press [Done].
iR6570_CMB_Upgrade_ENG_Post_Final.book Page 32 Tuesday, May 24, 2005 12:12 PM