Installation guide

Protocol Settings

5-11

Using a TCP/IP Network

On the IPv6 Settings screen, press [Stateless Address Settings]

→

specify the

following.

[On] for <Use Stateless Address>: A stateless address is automatically set when the machine is started.

The stateless address is discarded when the machine is restarted (with the machine's main power switch

ON).

On the IPv6 Settings screen, press [Manual Address Settings]

→

specify the

following.

[On] for <Use Manual Address>: You can set the IPv6 address manually.

Enter the IPv6 address value in [Manual Address] and the IPv6 address prefix length in [Prefix Length].

Enter the default router address value in [Default Router Addr.]. If you do not want to specify the default

router address, leave [Default Router Addr.] blank.

You cannot use a manual address if you leave [Manual Address] blank. You also cannot set any of the

following types of address for [Manual Address]:

Multicast address

Address composed entirely of zeros

IPv4 compatible address (an IPv6 address with the top 96 bits set to '0' and an IPv4 address in the lower

32 bits)

IPv4 mapped address (an IPv6 address with the top 96 bits set to '0:0:0:0:0:ffff:' and an IPv4 address in the

lower 32 bits)

You cannot enter a multicast address or an address composed entirely of zeros in [Default Router Addr.].

•