Installation guide

Before You Start the Remote UI

13-4

Managing the Machine from a Computer

Enabling the Remote UI

You must use the machine's control panel to enable the Remote UI.

Press (Additional Functions)

→

[System Settings]

→

[Remote UI].

If the System Manager ID and System Password have already been set, enter the System Manager ID and

System Password using

- (numeric keys)

→

press (Log In/Out).

If the desired setting is not displayed, press [ ] or [ ] to scroll to the desired setting.

Select [On]

→

select whether to use SSL.

Select [Off ] to disable the Remote UI.

<Use SSL>:

[On]: Allows secured transmission using SSL.

[Off ]: Prohibits secured transmission using SSL.

Any changes made to <Use SSL> are also applied to <Use SSL> in <Use HTTP> in MEAP Settings in System

Settings (from the Additional Functions screen).

Press [Done] repeatedly until the Basic Features screen appears.