Installation guide

Envelope Feeder Attachment-C2 (Optional)
2-25
2
Routine Maintenance
Load the envelopes, as shown below.
Front
Align the leading edges of the envelopes, and make sure that they are held in place under the claw.
Claw
Envelopes which have been rolled or curled must be straightened out prior to use.
Make sure that the height of the envelope stack does not fall below the height limit mark (
).
The maximum height (quantity) of envelopes that can be loaded into the cassette is approximately
11/4"(30 mm).
The maximum height (quantity) of envelopes varies according to the envelope type and user operating
conditions, but as a reference, 11/4"(30 mm) is approximately 50 envelopes.
•
•
•
•