Installation guide

Clearing Paper Jams
3-11
3
Troubleshooting
1 Press the button on the right cover of the main unit, and open the right
cover.
If the optional Paper Deck-Q1 is attached to the main unit, move the paper deck away from the main unit
before proceeding with this procedure. For more information, see e-Manual > Optional Equipment.
If the optional Copy Tray-J1 is attached to the main unit, remove all of the output paper from the tray. For
more information, see e-Manual > Optional Equipment.
2 Pull down the upper cover of the fixing unit by its tab, and remove any
jammed paper.
If there is paper jammed in the lower part of the fixing unit, proceed to step 3.
The fixing unit and its surroundings are subject to high-temperatures. When removing
jammed paper, take care not to touch anything in this area, except the jammed paper and
the upper cover.