Getting Started Guide

FB1200S Getting Started
41
Macintosh
Windows
Run the Scanning Software.
1 Place your document on the document glass as
illustrated.
• For the purposes of calibration, a single, thin sheet of paper is best.
• Open the document cover, orient the image face down and align its
top edge with the alignment mark at the back of the scanner.
• Close the document cover, being careful not to dislodge the
document.
2 Open the [File] menu and select [Import] and
[Canon PI CS-S 3.6].
▼The Plug-in Module CS-S window will display and calibration will
start.
• Never lift the document cover during calibration.
WARNING
Bottom Edge
Top Edge