Specifications

104
Canoga Perkins
7.5 2240 Fiber Optic Modem Configurations
2240-S-XXX-XX-XX-X S = STANDALONE
2240-R-XXX-XX-XX-0 R = RACKMOUNT
POWER OPTIONS
0 - N/A
1 - 115V-AC WALL PLUG
2 - 115/230V IN-LINE
3 - 48VDC (Call Canoga Perkins for additional DC options)
CRYSTAL OPTIONS
00 - NO CRYSTAL
The 2240 Fiber Optic Modem provides most standard clock rates
with built in oscillators. If a non-standard internal clock rate is
required, refer to Section 3.3, or call Canoga Perkins and ask for
Applications Support.
FIBER OPTIONS MULTIMODE (STANDARD)
01 - 850nm LED ST
11 - 1310nm LASER ST
13 - 1310nm LASER FC
16 - 1310nm LP LASER ST
17 - 1310nm LP LASER FC
SINGLE MODE (STANDARD)
11 - 1310nm LASER ST
13 - 1310nm LASER FC
16 - 1310nm LP LASER ST
17 - 1310nm LP LASER FC
21 - 1550nm HP LASER ST
23 - 1550nm HP LASER FC
INTERFACE OPTIONS
432 EIA 423 / EIA 232 / DB-25 w/ Control
422 EIA 422 / DC-37 w/ Control
430 EIA 530 / DB-25
435 V.35 / MRC-34 w/ Control (Special Situations Only)
436 V.35 / MRC-34 w/ Control
4B1 1.544 / 2.048 T1 / E1 DA-15
4B2 1.544 / 2.048 T1 / E1 / TERM STRIP
4B3 1.544 / 2.048 T1 / E1 / BNC
-BN TTL / BNC
-TW 422 / TWIN AX
TW8 MIL 118-114A / TWIN AX
T22 422 / 5 Conn TWIN AX
T88 MIL 188-114A / 5 Conn TWIN AX
D88 MIL 188-114A / DC-37
* MC1 Multi-channel; (1) EIA 449 (DC-37), EIA 423 (DB-25)
* MC2 Multi-channel; (1) V.35 (MRC-34), EIA 423 (DB-25)
* * P53 Programmable 8 Bit Buffered Interface, EIA 530 / DB-25
4PB REDUNDANT PADDLE BOARD
000 NO INTERFACE
* Includes Adapter, EIA 423 to EIA 366 ACE, Male to Female, DB-25
and Adapter, EIA 423 to EIA 366 DTE, Male to Female, DB-25.
* * Consult Factory Before Ordering to Confirm Configuration.
Note: RS prefix designations have been changed to EIA.
The EIA 232 and RS-232 are the same Part Number.