User Guide

14
6 - MAINTENANCE
TABLE ON FORK SPECIFICATIONS
NOTE: reference numbers in this chapter refer to the parts belonging to the fork exploded view of Fig. 10.
TAB.1
ROUTINE MAINTENANCE USE
COMPETITION NOT COMPETITION
1- Dust seal cleaning: CROSS and ROAD After every race After every ride
2- Oil change: CROSS After 6 hours After 20 hours
ROAD After 30 hours After 60 hours
3- Oil seal change: CROSS After 6 hours After 20 hours
ROAD After 30 hours After 60 hours
4- Air bleeding: CROSS and ROAD After every ride Every month
NOTE: On muddy or sandy terrain forks should be checked after shorter periods of time (-30%) than those shown
in the above table.
TAB.2
METRIC TOOLS AVAILABLE ON THE MARKET
-13-17-19-30 and 45 mm hexagon wrenches ruler calibre
-21 mm socket wrench flat screwdriver
- flat and cross-type screwdrivers
TAB.3
PART TO BE TIGHTENED TORQUE (NM)
- Stop screw (36) 50
- Lock nut (12) on plug (1) 30
- Plug (1) on damping rod (20) 10
- Plug (35) on slider (16) 25
- Air bleed screws (1A) 7
- Nut (45) on rebound unit rod (39) 10
- Nut (15) on compression unit rod (8) 10
TAB.4
CONSTANT K (N/MM)CODE LENGTH (MM)Ø WIRE N° TOT. TURNS
3,8 5141144 435 4,5
4 5141145 470 4,8
4,2 5141146 460 4,8
4,5 5141147 460 4,8
4,8 5141148 475 5
5 5141149 470 5
4/4,4 5141150 470 4,8
4,2/4,6 5141151 460 4,8
TAB.5
OIL CLIMATE FEATURES QUANTITY
Marzocchi Art.550013 TEMPERATE sae 7,5 APPROX. 670CC
Marzocchi Art.550003 COLD sae 5 APPROX. 670CC
TAB.6
STANDARD SETTING
COMPRESSION: from “fully closed” position, unscrew by 2 clicks
REBOUND: from “fully closed” position, unscrew by 10 clicks