User Guide

Printed : 11/8/01

P/N 912-5001985

2 - OPENING A CALIBRATION FILE

The OPEN Calibration File (saved) button opens the Windows explorer so that you can look for and

open a calibration file that is saved on your PC or Pocket PC. A saved calibration file might be one that

you have received via e-mail, downloaded from the Cannondale website, or one that is stored on a

diskette or CD. This button functions the same way as if you click File - Open.

3 - RECEIVING A CALIBRATION FILE FROM THE VEHICLE ECU

The RECEIVE Calibration File (from ECU) button allow you to receives the calibration file from the

vehicle’s ECU to the Cannondale Diagnostic Tool. It works just like opening a saved calibration file, but

unlike opening a saved calibration file on your computer the calibration file will be “received” from the

vehicle ECU across the data cable.

NOTE :

The received calibration file is not removed from the ECU, it is merely copied into the Cannondale Diagnostic Tool

program.

1. Connect the data cable to the computer and vehicle.

2. Open the Cannondale Diagnostic Tool software on your PC.

3. Power-up the vehicle’s ECU.

4. Click the RECEIVE Calibration File (from ECU) button.

After you click the button, the data transfer will start. While the data is copied from the ECU to the PC the

progress indicator in the upper right of the menu will display and the LED on the data cable block may

appear to flicker. The time required for the transfer could vary. It should take place within 1 minute.

When the entire data transfer process is complete, you will see the “Receive complete” message.

5. Click OK. The vehicle calibration file has now been copied to the Cannondale Diagnostic Tool program.