Specifications
WWW.ELLETTBROTHERS.COM
®
™
•System is designed to deliver the most ecient mechanical steering possible •Least eort, least
lost moon, smooth release of NFB clutch with the best holding power •30% reducon in steering
wheel eort compared to the 4.2 Helm •Quick connect feature on both cable & spent travel tube side
•Normal steering cable installaon side marked on casng •No tools required to snap steering cable
or spent travel tube in place •Easy system installaon, single steering cable to route with standard 8''
bend radius for the cable •No bleeding of hydraulic system or electrical wiring required •Fits standard
SeaStar Soluons
®
dash cut out with standard Safe-T and 4.2 bracket •Gear train is custom designed
by SeaStar Soluons
®
to allow the smallest foot print with the lowest eort available in a mechanical
Helm •Helm has smaller footprint than the current 4.2 Helm •Also has an improved NFB clutch “feel”
to allow smoother clutch release •“XTREME” Steering Cable designed for this helm •Cable oers
lower backlash & is more ecient than a standard steering cable •Helm is part of a system and must
use the XTREME SSCX64 Steering Cable •New bezel design for standard Helm •Label w/designaon
of clutch next to steering cable connecon to idenfy the style of helm •Outer helm casng is a zinc
alloy with new design for the clutch mechanism •All casngs are designed to reduce weight while of-
fering superior strength
Order # Mfg. # Length Sugg.Ret.
™
™
SSX17611 11’ $346.99 $216.99
SSX17612 12’ 346.99 216.99
SSX17613 13’ 346.99 216.99
SSX17614 14’ 346.99 216.99
SSX17615 15’ 346.99 216.99
SSX17616 16’ 346.99 216.99
SSX17617 17’ 346.99 216.99
SSX17618 18’ 346.99 216.99
SSX17619 19’ 346.99 216.99
SSX17620 20’ 346.99 216.99
SSX17621 21’ 346.99 216.99
SSX17622 22’ 346.99 216.99
SSX17623 23’ 346.99 216.99
SSX17624 24’ 346.99 216.99
SSX17625 25’ 346.99 216.99
™
™
SSX17711 11’ 460.99 288.50
SSX17712 12’ 460.99 288.50
SSX17713 13’ 460.99 288.50
SSX17714 14’ 460.99 288.50
SSX17715 15’ 460.99 288.50
SSX17716 16’ 460.99 288.50
SSX17717 17’ 460.99 288.50
SSX17718 18’ 460.99 288.50
SSX17719 19’ 460.99 288.50
SSX17720 20’ 460.99 288.50
SSX17721 21’ 460.99 288.50
SSX17722 22’ 460.99 288.50
SSX17723 23’ 460.99 288.50
SSX17724 24’ 460.99 288.50
SSX17725 25’ 460.99 288.50
BY SEASTAR
®
•Interlocking slide guides oer enhanced strength while provid-
ing smooth, bind-free travel •Lead screw assembly sets the plate
height & the side locks are used to hold the posion •Stainless steel lead screw is resistant to corrosion
& pre-greased for smooth operaon •Maximum supported engine weight of 585 lbs is capable of han-
dling the most demanding outboard engines including the latest generaon of 4-strokes
JP1040 4’’ $347.99 $250.42
JP1060 6” 422.99 303.94
JP1080 8” 437.99 315.01
BY SEASTAR
®
•Adjustable on the water so there is no need to hoist the
engine to make a change •Simple lead screw & nut as-
sembly allows for quick and easy height adjustment •Posion is held with a single locking nut •Stain-
less steel lead screw is corrosion-resistant & pre-greased for smooth operaon •Integrated grease
ngs allow for easy maintenance & long life •Heavy-duty slide mechanism w/internal bearings allows
for smooth travel & a strong resistance to binding •Maximum supported engine weight of 585 lbs is
capable of handling the most demanding outboard engines including the latest generaon of 4-stroke
engines
JP2060 6” $501.99 $361.16
JP2080 8” 517.99 372.24
BY SEASTAR
®
BY SEASTAR
®
•Maximum supported engine weight of 625 lbs is capable of
handling the most demanding outboard engines including the
latest generaon of 4-strokes •Fully integrated hydraulic ac-
tuator, with self-purging reservoir, provides smooth powered
height adjustment •With the actuator unit integrated into
the plate, there is no need to sacrice boat space for a pump
or hydraulic lines •Opmized li speed provides precise posi-
oning that will not overshoot •Heavy-duty slide mechanism
w/internal bearings provides smooth, bind-free travel with a
strong resistance to torque lock •Fully captured slide mechanism prevents over-extension of the plate
•Integrated grease ngs allow for easy maintenance & long life •Stainless steel guide rods w/wip-
ers are corrosion-resistant & self-cleaning for low maintenance & high reliability •Up to 6” of stroke
depending on control method
JP3040R 4” $1,159.99 $813.92
JP3060R 6” 1,159.99 813.92
JP3080R 8” 1,298.99 911.44
JP3060T 6” 1,315.99 923.33
JP3080T 8” 1,454.99 1020.85
JP3060X 6” 1,410.99 989.92
JP3080X 8” 1,566.99 1099.33