Owner`s manual

19
www.cannondownriggers.com
Getting Started
Digi-Troll 5 Keypad
The Digi-Troll 5’s keypad has six keys located below the display.
Power
The ON/OFF key functions:
1) Turn the Digi-Troll ON - Simply press and release.
2) Turn the Digi-Troll OFF - Press and hold power button for three seconds.
MENU
The Menu moves the display through up to four screens
for programming (see section on programming for
details). After 7 seconds of inactivity on the key pad, the
screen reverts back to the weight line out display.
UP
During manual operation, this key raises the weight
when pressed. In programming mode, the UP key
increases numeric values.
DOWN
During manual operation, this key lowers the weight
when pressed. In programming mode, the DOWN
key decreases numeric values.
WATER ZERO
The water zero key provides a reset option for
depth. When pressed and held, the line out count
will reset to zero.
MENU
The menu key provides access to all programming
submenus.
AUTO UP
Press AUTO UP to raise the weight to the water
zero set point at any time. AUTO UP uses the
speed 5 regardless of your setting and cancels any
other mode of operation (bottom following, cycling,
etc.) when used.