user manual

 Contents 

Chapter Contents

StillImages

• A blinking [ ] icon warns that images are more likely to be

blurred by camera shake. In this case, mount the camera

on a tripod or take other measures to keep it still.

• Ifyourshotsaredarkdespitetheashring,movecloser

tothesubject.Fordetailsontheashrange,see“Flash

Range” (=

258).

• The subject may be too close if the camera only beeps

once when you press the shutter button halfway. For

details on the focusing range (shooting range), see

“Shooting Range” (=

259).

• To reduce red-eye and to assist in focusing, the lamp may

be activated when shooting in low-light conditions.

• A blinking [h] icon displayed when you attempt to shoot

indicatesthatshootingisnotpossibleuntiltheashhas

nishedrecharging.Shootingcanresumeassoonasthe

ashisready,soeitherpresstheshutterbuttonalltheway

down and wait, or release it and press it again.

• Although you can shoot again before the shooting screen

is displayed, your previous shot may determine the focus,

brightness, and colors used.

• You can change how long images are displayed after shots

76).