Owner`s manual

www.cannondownriggers.com

Digi-Troll Factory Settings

Your Digi-troll 10 was shipped with the following factory settings so that you can use your downrigger immediately

without further programming.

Depth Memory Settings:

#1 25 feet

#2 50 feet

#3 75 feet

#4 100 feet

#5 150 feet

Bottom Following

Maximum bottom following depth 50 feet

Distance of weight off bottom 10 feet

Sensitivity 6 feet

Cycling

Cycle time 5 seconds

Cycle depth UP 90 feet

Cycle depth DOWN 100 feet

Line on Reel 400 feet

Up speed 3

Down speed 3

PIC 0.6 vdc

Cable setting Uncoated

Units English

Using Programmable Depths

The Digi-troll 10 allows you to program and store up to ﬁ ve depths for quick movement of the weight without having to

manually hold the DOWN key until the desired depth is reached. When in the (default) depth screen, simply press the

Select key until the required depth memory is displayed. For example, pressing the Select key three times will result

in a display similar to that shown on the opposite page. Use UP or DOWN keys to change the depth if desired and

press the RUN key to move the weight to that depth.

Getting Started