Owner`s manual

www.cannondownriggers.com

Units Menu

This menu lets you switch between English and Metric units.

Press the Menu six times from the depth screen or once from the Line On Reel Screen

Un/Coated Menu

This menu lets you switch between Cannon coated and uncoated cable. This setting is important as well in deter-

mining accurate line out.

Press the Menu seven times from the depth screen or once form the Units screen.

Bottom Depth Display

(Cannonlink or Optional Transducer Required)

This feature allows your downrigger to be used as a depth ﬁ nder by continuously displaying the bottom depth. The

unit needs to be hooked up to either the optional Digi-Troll transducer or a Humminbird ﬁ shﬁ nder (1100, 900, 700, or

Matrix Series) via the Cannonlink module. If hooked up to Cannonlink, the sonar display will match the ﬁ shﬁ nders

depth. The connection to the Cannonlink or transducer will need to be installed prior to power up of the downrigger.

Sonar Offset Menu

This menu lets you set an offset for your sonar value. In comparison with your Humminbird or other transducer, if

your Digi-Troll transducer is mounted a foot or two of difference in height you can account for that difference.

Press the Menu eight times from the depth screen or once from the Un/Coated screen.

Getting Started