Owner`s manual

www.cannondownriggers.com

Cycling Menu

From the depth screen, press the MENU key once (or once from the Bottom Track screen if the transducer is con-

nected) to enter this menu. The ﬁ rst screen allows you to adjust the pause time of the weight between cycling move-

ments. Press UP or DOWN to adjust. You can adjust the cycle time in steps of 1 second increments from 5 to 60

seconds. Press the “RUN” button to activate.

Press Select to adjust the cycle depth. Down (dn) will be displayed for the down boundary. Press the UP or DOWN

key to increase or decrease the down boundary. Press Select again to adjust the UP boundary. Press the UP or

DOWN key to increase or decrease the up boundary.

Getting Started