Technical data

Film Loading
Canon PELLIX QL accepts any standard 35mm
film in cartridge for daylight loading.
When loading a new
film, avoid direct sunlight.
e When repacking a long-wound film for
darkroom loading into the ordinary cartridge,
trim the end of the
leader part in between the
perforations.
Open the back cover.
1
Raise the back cover lock, make a half
turn to the left, and the cover will rise.
Open the back cover fully. When the back
cover is opened, the
QL cover also opens simul-
taneously and
is ready for loading the film.
e The QL cover automatically opens and closes
together with the opening and closing of the
back cover.
Do not touch the QL cover.
2 Insert cartridge.
Raise the rewinding knob ail the way.
When the cartridge has been inserted, push the
knob back to
its former position again. Push
the fork into the axis of the cartridge. In case
the knob does not fully return,
it can be easily
put into proper position
by turning it slightly to
the left or right.
-q
Set film tip to the red mark.
- Face the cartridge as shown in the
picture and hold the film down with the left
hand so that
it does not rise.
25