Technical data

Exposure Setting 1-Shutter Speed Priority Method
4
Set the shutter at a desired speed.
of the
pellicle mirror.
I
Face the camera towards the photo.
2
graphic subject, look into the viewfinder,
and press the
CdS actuating lever fully.
Either keep pressing the lever or lock
3
the lever and turn the aperture ring.
Set the meter needle at the o index
4 within theviewfinder for correct exposure.
* Canon's TTLM system has been adopted in
the
PELLIX QL which provides the most accu.
rate photometry. Under this system, the CdS
photocell of the built.in meter is placed in the
closest position to the film on the back side
* The rectangular frame on the outside of the
prism screen withintheviewfinder is thesamesize
as the light receiving area of the
CdS photocell.
Place the center of the photographic subject
within this frame and measure the intensity of
light. In this way the photographer can decide
the best exposure for his photographic needs.
The
TTLM system makes possible the measuring
of exposures in counter-light conditions.
I) Measurement at " B" and "X" indexes of
the shutter dial is not possible with theexposure
meter because
" 0" is used for long exposures
over one second and
" X" is used for speedlight.