Technical data

CdS Actuating Lever
The exposure meter can be set into measuring
condition by turning the
CdS actuating lever
towards the
lens.
The CdS actuating lever can be fixed by turning
it towards the lens after setting the lock lever
at "L" position. If the iock lever is returned
to its original position
(. index) the CdS actuat.
ing lever will also return to its original position.
* The shutter cannot be released while the CdS
actuating lever is being turned or when it is
locked with the iock lever.
How to Measure the Average Bright-
ness
The exposure meter on the Canon PELLIX QL
is of the spot reading type which accurately
measures any special spot of the subject. There-
fore, when measuring a subject with greatly
differing dark and bright parts, take two
measurements, one each of the dark and bright
parts. Then obtain the average
value and set
the F stop or shutter speed accordingly.