Technical data

Make reverse turn
when it stops at "X". -
Make reverse turn .
when it stops at " B ".
Shutter and Aperture Adjustment
The shutter and aperture adjust the exposure.
with the shutter adjusting the exposure time
and the aperture adjusting the amount of light.
The Canon PELLIX QL uses the zeromethod
coupled meter, and it is very simple to get the
proper exposure.
Shutter Speed Dial
By revolving the dial, it is possible to adjust the
speed by turning
it to the necessary index
number. The index on the dial shows the
denominators of
l/lOOO sec., 1115 sec., etc.
* The shutter speed dial does not revolve
between the indexes " X" and " 6".
* Set the index at the position where the click
12
stop catches.
$ "8" means bulb exposure. The shutter, which
remains open during the pressing oftheshutter
button, is employed when making exposures
of more than one second.
In case of " B " index, adjust it to the white
dot just below the " B " index.
I) When it is necessary to make an exposure over
an extended time, first set it at" B ".
Keep the
shutter button pressed, turn the time lock lever
to indicator
" L".
In this case, even if the finger
is removed, the exposure continues. When the
lever is returned to "A", the shutter closes.
* Time exposure is possible also by using the