Technical data

-
The fllm co
Is advanced
Film Wit~ding
1
The turning of the film advance lever
cocks the shutter,
fiim winding and
aperture charging in one motion.
When the shutter button is pressed, the
2 diaphragm simultaneously closes down
to the preselected
F stop and the shutter
operates.
Immediately after the shutter operation, the
advance
iever is again in ready position.
I) Be sure that the safety lock lever is set at
"A".
* The winding may be done by moving the
iever with several short strokes.
I) After loading the fiim, make another wind.
since there is the possibility of the very first
winding not catching.
* Unless the winding is completed, the shutter
will not be actuated, even though the shutter
button is pressed. In such a case, check the
winding once more.