Owner's manual

44
7. Others
7-1. Basic specifications
Type and Model
D155 Density Meter
Discipline
Oscillating Glass U-tube
Measuring Range
0 to 2g/cm
3
Measuring Temperature Range
15 to 25
℃
Precision
Density
±0.001g/cm
3
Temperature
±0.1
℃
Repeatability
Density
SD 0.0005g/cm
3
Resolution
Density
0.0001g/cm
3
step
Temperature
0.05
℃
step (Setting Resolution: 0.1
℃
step)
Specific Gravity
0.0001 step
Temperature
Compensated
Parameter
0.0001 step
API Degree
0.1 step
Measurement Time
2 to 4 min
Viscosity Correction
None
Display 1) Screen: 4×20 LCD backlight
2) Displayed Parameter:
Temperature (℃)/ Density/ Specific Gravity
Number of temperature compensation tables for petroleum products
Temperature Compensated Parameter (60℉Specific Gravity/ 15℃
Density/
20
℃
Density)/ API Degree/ Other messages
Sampling Method Manual sampling by syringe
(optional peristaltic pump for automatic sampling)
Min. required Sample Amount
Syringe: Approx. 1mL, Pump: 8mL
Maximum Sample Viscosity
Approximately 1000 mPa⋅s when using optional peristaltic pump
Calibration
Pure Water (factory/service calibration of air)
Storage of Measurement Result
Last 10 measurement results stored in internal memory
Temperature Compensation
Table for Petroleum Products
ASTM D1250 Table 23(A,B,D), 53(A,B,D), 59(A,B,D)
Interface
RS-232C×1ch, USB×1ch
Ambient Conditions for unit 1) Temperature: 5 to 35℃
2) Humidity: Below 85
％
RH (No condensation)
Power Source
AC100
～
240V 50/60Hz
Power Consumption
Approx. 30W
Dimension
251mm (W) × 408mm (D) × 165mm (H) [10” x 16” x 6.5”)
Weight
11.6kg (25.64 lbs)
Standard Supplied Accessory
- Connection Tube: Qty 1
- Syringe 2ml: Qty 5
- AC Power Cord: Qty 1
- Wrench: Qty 1
- Tube 0.5x1.5 L=400 PTFE: Qty 1
Optional Accessories
- Dot matrix printer
- Peristaltic pump
- Soft-Cap Data Capture Software
CANNON
®
D155 Density Meter Instruction & Operation Manual
Version 1.1b – August 2014; CANNON® Instrument Company
2139 High Tech Road • State College, PA • 16803 • USA