Owner's manual

31
4-12. How to connect the optional printer or a personal computer (PC)
The optional printer can be connected to the D155 unit so that the measurement and calibration results
together with the date and time of measurement can be printed out. Connect the supplied printer cable
to the RS-232C port (DB-9M) on the back of D155 unit as shown.
A personal computer (PC) can be connected instead of the printer so that data can be exported. A
data collection software package – SOFT-CAP Data Capture Software is available as an option with the
D155. Please consult the separate SOFT-CAP Operation Manual for more details on installation and
use.
Warning!
Use correct AC power adapter suitable for the AC
line voltage. Make
sure to use the proper rated voltage before plugging it into
the outlet.
Failure may damage the printer or even cause the adapter itself to catch
fire.
Note:
Do not place the printer on the top of the main unit in order to avoid the
influence magnetic field of the printer on the measuring cell.
The DIP switch on the Dot Matrix printer kit (P/N: 95.0239)
is configured
as shown below. When you have changed this switch configuration,
refer to the Instruction manual for the printer and set it as shown below:
1
2
3
4
5
6
7
8
Dip SW-1
OFF
OFF
ON
OFF
OFF
OFF
OFF
OFF
CANNON
®
D155 Density Meter Instruction & Operation Manual
Version 1.1b – August 2014; CANNON® Instrument Company
2139 High Tech Road • State College, PA • 16803 • USA