USER INSTRUCTIONS OVENS EN 02 CANDY HOOVER GROUP S.R.L.
Safety Indications • WARNING: the appliance and accessible parts become hot during use. Be careful not to touch any hot parts. •WARNING: the accessible parts can become hot when the grill is in use. Children should be kept at a safe distance. •WARNING: ensure that the appliance is switched off before replacing the bulb, to avoid the possibility of electric shocks.
•Only use the meat probe recommended for this oven. •Do not use a steam cleaner. •Put the plug into a socket equipped with a third contact which corresponds to the earth and which must be connected and in operation. For models without a plug, attach a standard plug to the cable that is able to bear the load indicated on the tag. The earth conductor is yellow-green in colour. This operation should be carried out by a suitably qualified professional.
Summary General Instructions 5 Product Description 7 Use of the Oven 8 Oven Cleaning and Maintenance 9 Troubleshooting 1.1 Safety indications 1.2 Electrical safety 1.3 Recommendations 1.4 Installation 1.5 Waste management 1.6 Conformity declaration 2.1 Overview 2.2 Accessories 2.3 First use 3.1 Display description 3.2 Cooking modes 4.1 General notes on cleaning 4.2 Maintenance • Removal of the oven window • Removal and cleaning of the glass door • Changing the bulb 5.1 F.A.Q.
1. General Instructions We thank you for choosing one of our products. For the best results with your oven, you should read this manual carefully and retain it for future reference. Before installing the oven, take note of the serial number so that you can give it to customer service staff if any repairs are required. Having removed the oven from its packaging, check that it has not been damaged during transportation. If you have doubts, do not use the oven and refer to a qualified technician for advice.
NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket available so that the oven can be connected to this if it is removed from the space in which it is installed. The power cable must only be substituted by technical service staff or by technicians with equivalent qualifications. 1.3 Recommendations After each use of the oven, a minimum of cleaning will help keep the oven perfectly clean.
2. Product Description 2.1 Overview 1 1. Control panel 2. Shelf positions (lateral wire grid if included) 3. Metal grill 4. Drip pan 5. Oven door 2 4 3 5 2.2 Accessories 1 Drip pan 2 Metal grill Collects the residues that drip during the cooking of foods on the grills. Holds baking trays and plates. 2.3 First Use PRELIMINARY CLEANING Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth.
3. Use of the Oven 3.1 Display description 1. Thermostat selector knob 2. Function selector knob 3.2 Cooking Modes Function Dial Function (Depends on the oven model) LAMP: Turns on the oven light. DEFROST: When the dial is set to this position. The fan circulates air at room temperature around the frozen food so that it defrosts in a few minutes without the protein content of the food being changed or altered. * FAN COOKING: We recommend you use this method for poultry, pastries, fish and vegetables.
4. Oven cleaning and maintenance 4.1 General notes on cleaning The lifecycle of the appliance can be extended through regular cleaning. Wait for the oven to cool before carrying out manual cleaning operations. Never use abrasive detergents, steel wool or sharp objects for cleaning, so as to not irreparably damage the enamelled parts. Use only water, soap or bleach-based detergents (ammonia). GLASS PARTS It is advisable to clean the glass window with absorbent kitchen towel after every use of the oven.
REMOVAL AND CLEANING OF THE GLASS DOOR 1. Open the oven door. 2.3.4. Lock the hinges, remove the screws and remove the upper metal cover by pulling it upwards. 5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove the second and third glass (if present)). 7. At the end of cleaning or substitution, reassemble the parts in reverse order.
CHANGING THE BULB 1. Disconnect the oven from the mains supply. 2. Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type. 3. Once the defective bulb is replaced, replace the glass cover. 5. Troubleshooting 5.
INSTALLATION EN Opening 460 mm x 15 mm 550 mm 590 mm 560 mm 595 mm 580 mm 560 m m 545 mm 595 mm 22 mm GB If the furniture is equpped with a bottom at the back part, provide an opening for the power supply cable. 500 mm x 10 mm 560 mm x 45 mm GB If the oven does not have a cooling fan, create an opening 460 mm x 15 mm m 560 m Opening 560 mm x 45 mm mm Opening 500 mm x 10 mm 10.2017 • REV.
