User Guide

The water-stop device protects against water damages caused by

leaks on the fill hose which could develop due to natural ageing

of the hose.

In the water-stop system the leaking water fills the corrugated

hose and activates a stop valve which cuts off the water supply to

the machine.

This fault is shown by a red sector on the window «A».

Would this occur, please refer to your Service Agent.

If the hose is not long enough for correct connection, it must be

replaced with a longer one. The hose can be obtained from your

Service Agent.

Watercontrol-system (D 73 A)

Red button blocked

valve indicator

Safety antitwist device

(press and twist to

remove the washer)

Höhe

Breite

Tiefe

Tiefe bei geöffneter Tür

mit Arbeitsplatte

120

Beschreibung der Bedienelemente

Technische Daten:

Maße:

onne Arbeitsplatte

59,8

56,3

117

Fassungsvermögen (EN 50242)

Ventildruck der Hydraulikanlage

Absicherung

Gesamtanschlußwert

Spannung

12 Maßgedecke

Min. 0,08 - Max 0,8 MPa

(s. Matrikelschild)

A Start/Stop Taste

B “65°C” Taste

C Griffmulde zum Öffnen der Tür

D Programmwahlschalter

E Funktionslampe

A B C D