Description of the appliance Control panel Frist use an installation Frist use an installation Daily use 10 11 12 Helpful hints and tips Cleaning and care What to do Reversing the door Installing the door handle 13 Disposal of the appliance 18 14 15 16 17
Thank you for purchasing this product. Before using your refrigerator, please carefully read this instruction manual in order to maximize its performance. Store all documentation for subsequent use or for other owners.
SAFETY INFORMATION The refrigerator contains a refrigerant gas (R600a: isobutane) and insulating gas (cyclopentane), with high compatibility with the environment, that are, however, infl ammable. We recommend that you follow the following regulations so as to avoid situations dangerous to you: Before performing any operation, unplug the power cord from the power socket. • The refrigeration system positioned behind and inside the refrigerator contains refrigerant. Therefore, avoid damaging the tubes.
• • • • • • • • • • • Do not install the appliance near heaters or inflammable materials. Do not use extension cords or adapters. Do not excessively pull or fold the power cord or touch the plug with wet hands. Do not damage the plug and/or the power cord; this could cause electrical shocks or fires. It is recommended to keep the plug clean, any excessive dust residues on the plug can be the cause fire. Do not use mechanical devices or other equipment to hasten the defrosting process.
manufactu rer. The refr igerant and insulatio n blowing gas are fla mmable. When disposing of th e appliance, do so only at an auth orized waste disposal centre. Do not expose to fla me. The refr igerant isobute ne (R 600a) is conta ined with in th e refr igerant circuit of th e appliance, a natu ral gas with a high level of environmenta l compatib ility, which is neverth eless fla mmable.
SCRAPPING OLD APPLIANCES This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used). It is important to have WEEE subjected to specific treatments, in order to remove and dispose properly all pollutants, and recover and recycle all materials.
First use an installation Cleaning before use Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and meutral soap in order to remove the typical smell of a brand new product, then dry thoroughly. Installation Positioning Warning! Before installing, read the instruction carefully for your safety and the correct operation of appliance. Position the appliance away from sources of heat such as stoves, radiators, direct sunlight, etc.
First use an installation Leveling 2.Put screw into the hole of rubber supporting pad. scr ew The appliance should be level in order to eliminate vibration. To make the appliance level, it should be upright and both adjusters should be in stable contact with the floor. You can also adjust the level by unscrewing the appropriate level adjustment in the front (use your fingers or a suitable spanner). rubber supporting pad 3.Make screw in alignment with the hole on lower base cover .
Daily use Accessories Installation door rack 1) First, install the left of the door rack. Second, inward-press the other side and downward-press this side until installation it. Movable shelves/trays Various glass, plastic storage shelves or wire trays are included with your appliance different models have different combinations and different models have different features. The walls of the refrigerator are equipped with a series of runner so that the shelves can be positioned as desired.
Helpful hints and tips Noises during operation Hints for fresh food refrigeration Clicks - Whenever the compressor switches on of off, a click can be heard. Do not store warm foods or evaporating liquids in the appliance. Humming - As soon as the compressor is in operation, you can hear it humming. Do cover or wrap the food, particularly if it has strong flavor or odor. Bubbling - When refrigerant flows into thin tubes, you can hear bubbling or splashing noises.
Cleaning and care Cleaning and care Accumulation of dust at the condenser increases energy consumption; clean the condenser at the back of the appliance once a year with a soft brush or a vacuum cleaner.(Only for the outside-condenser product) For hygienic reasons, the appliance interior, including interior accessories, should be cleaned regularly. The appliance should be cleaned and maintained at least every two months.
What to do if... performed by competent service engineers. Improper repairs can give rise to significant hazards for the user. If your appliance needs repairing, please contact your specialist dealer or your local Customer Service Center. Warning! Before troubleshooting, disconnect the power supply. Only a qualified electrician or other personnel must carry out the troubleshooting that is not in the manual. Important! Repairs to the appliance may only be Problem Appliance dose not work.
Reversing the door The side in which the door opens can be changed from the right side (as supplied) to the left side, if the installation site allows for it. Tools you will need: 1. 8mm socket driver 3.Lift the door and place it on a padded surface to prevent scratching. Remove both adjustable feet and remove the bottom hinge bracket by unscrewing the bolts. Then transfer them to another side. Note: 1. You need move hinge axis from hole ① to ② before transfer. 2.
Installing the door handle If there is door handle separately provided in a plastic bag with your appliance, you can install it as follows . 1. Remove the screw on the door.Keep or install the screw covers on the side which have hinge. 2. Match the handle hole to the door , then fix the screw which you removed from the door to make the handle fixed firmly on the door.
Disposal of the appliance It is prohibited to dispose of this appliance in domestic household waste. Packaging materials Packaging materials with the recycle symbol are recyclable. Dispose of the packaging in a suitable waste collection container to recycle it. Before disposal of the appliance. 1. disconnect the main plug from the main socket. 2. Cut off the main cable and discard it.
4070859
