Operation Manual

WASHING MACHINE CANDY CTA 84 AA

A PROGRAMME/TEMPERATURE SELECTOR

B SPIN SPEED SELECTOR

C1 EASY IRON

C2 EXTRA RINSE

C3 SUPER FAST

G DOOR LOCK LAMP

H START/STOP KEY

S STOP/END OF CYCLE LAMP

V TIME REMAINING OR PROGRAMME PHASE LAMPS

p CONTROL POSITION INDICATOR

C3C2C1 H G

PAGE 1
WASHING MACHINE CANDY CTA 84 AA B S V C1 C2 C3 H G A p A PROGRAMME/TEMPERATURE SELECTOR B SPIN SPEED SELECTOR C1 EASY IRON C2 EXTRA RINSE C3 SUPER FAST G DOOR LOCK LAMP H START/STOP KEY S STOP/END OF CYCLE LAMP V TIME REMAINING OR PROGRAMME PHASE LAMPS p CONTROL POSITION INDICATOR 5 R
PAGE 2
Table of programmes mod. CTA 84 AA aprox. time min. Máx. temp. setting Máx. spin speed Máx.
PAGE 3
PREPARING THE WASH CYCLE 1.- Once the washing is loaded, ensure that the drum doors are properly closed.. 2.- Add detergent and additives, not exceeding the maximum level indicator. • detergent for pre-wash I • detergent for wash programme II • bleach • fabric conditioner SELECTING THE DESIRED PROGRAMMES AND OPTIONS 3.- Turn the programme selector (A) to the desired programme. 4.- Press the key or keys for any options desired (C1, C2, C3).
PAGE 4
To change or cancel a programme once the programme selected has started, proceed as follows: - Hold down the start key (H) until the stop/end of cycle lamp is burning steadily. The programme has been cancelled, and another may be selected. - Select the new programme. - Press the start key (H) again until one of the time remaining or programme phase lamps lights up. - The machine will then run the new programme selected.