User Manual

15
NEXT TIME – Regular usage
●
machine through the App, first you have to
enable the Smart Touch mode by turning
the knob to the Smart Touch indicator.
● Make sure you have unlocked your phone
(from stand-by mode) and you have
activated the NFC function; then, follow the
steps mentioned earlier.
● If you want to start a dry cycle, load
the laundry and close the door.
● Follow the instructions on the phone
display, KEEPING IT ON the Smart Touch
logo on the machine dashboard, when
requested to do so by the App.
Every time you want to manage the
NOTES:
Place your smartphone so that the NFC
antenna on its back matches the position
of the Smart Touch logo on the appliance
(as illustrated below).
If you do not know the position of your
NFC antenna, slightly move the
smartphone in a circular motion over
the logo until the App
confirms the connection. In order for the
data transfer to be successful, it is
essential TO KEEP THE SMARTPHONE
ON THE DASHBOARD DURING
T H E F E W S E C O N D S O F T H E
PROCEDURE; a message on the device
will inform about the correct outcome of
the operation and advise you when it is
possible to move the smartphone away.
Smart Touch
Thick cases or metallic stickers on
your smartphone could affect or
prevent the transmission of data
between machine and telephone. If
necessary, remove them.
The replacement of some components
of the smartphone (e.g. back cover,
battery, etc...) with non-original ones,
could result in the NFC antenna
removal, preventing the full use of the
App.
The management and the control of
the machine via App is only possible
"by proximity": it is therefore not
possible to perform remote operations
(e.g.: from another room; outside of
the house).
WIRELESS PARAMETERS
With this the Candy Hoover Group Srl,
declares that this appliance marked
with complies with the essential
requirem ents o f the Directiv e
2014/53/EU.
To receive a copy of the declaration of
conformity, please contact the
manufacturer at:
www.candy-group.com
Wireless Standard
ISO/IEC 14443 Type A and NFC Forum Type 4
Frequency band
Magnetic field limit
13,553-13,567 MHz (centre frequency 13,560 MHz)
< 42dBμA/m (at 10 meters)
Parameter
Specifications
EN
● Select the desired function in the App (e.g.:
starting a programme, the Smart Check-
up cycle, update statistics, etc…).