Washing machine Instructions for use CN 105 T
Introduction Please read these instructions for use carefully and all other information enclosed with the washing machine. Keep all documentation in a safe place for future reference or for any future owners. Note: this machine is solely for domestic use. Notes on disposal All packaging material used is environmentally-friendly and recyclable. Please help dispose of the packaging via environmentally-friendly means.
General delivery notes Please check that the following items are delivered with the appliance: - Instruction manual - Certificate of guarantee - Inlet hose - 32 minute programme dosing scoop - Liquid detergent compartment Check that no damage has occurred during transit, and if so, call your nearest Authorised Technical Support Service agent (see Customer Service) M) N.B! If the appliance is installed on a carpeted floor ensure that the ventilation holes on the base of the appliance are not obstructed.
Useful advice for users Tips on using your domestic appliance in the most environmentally-friendly and economical way Description of controls Fig.
EASY IRON button D The EASY IRON function minimizes creases as much as possible with a uniquely designed anti-crease system that is tailored to specific fabrics. MIXED FABRICS - the water is gradually cooled throughout the final two rinses with no spinning and then a delicate spin assures the maximum relaxation of the fabrics. DELICATE FABRICS – final two rinses with no spinning and then the fabrics are left in water until it is time to unload.
Detergent drawer A Programme selector The washing machine has 3 different programme groups according to type of wash, temperature and duration for handling the various types of fabric (see wash programme guide).
Sorting the laundry The correct way to wash - It is recommended you wash only items which are machine washable with water and detergent and not dry-clean items. Preparing the laundry A) Select the laundry. - If you need to wash rugs, bedspreads or other heavy items, it is best not to spin them.
TABLE OF PROGRAMMES FABRIC WEIGHT MAX kg PROGRAM FOR SELECT PROG. Resistant fabrics SELECT TEMP. °C Please read these notes CHARGE DETERGENT ❙ ❙❙ ● ● ❀ Whites & Prewash 4,5 1 Up to 90° Cotton, mixed resistant Whites normal 4,5 2 Up to 90° ● ● ● Cotton, mixed Fast coloureds 4,5 3 Up to 60° ● ● ● 3,5 4 Up to 40° ● ● ● Cotton, linen ● ● When washing heavily soiled laundry it is recommended the load is reduced to 3 kg maximum.
Dosages Detergents, washing aids and amounts to use Choice of detergent General purpose detergents - - Powder detergents, for a thorough wash, with bleaching agent, particularly suitable for use in hot wash programmes (60°C and over), for heavily soiled and stained laundry. Liquid detergents, particularly suitable for grease stains, such as greasy skin marks, cosmetics and oil. These detergents are not suitable for washing stained laundry, as they do not contain bleach.
Cleaning and routine maintenance Do not use alcohol-based scourers and /or thinners on the outside of your washing machine, just a wipe with a damp cloth will suffice. The washing machine needs very little maintenance: - Cleaning the drawer compartments. - Cleaning the filter. Cleaning the drawer compartments Even if it is not strictly necessary, it is good to clean the compartments for bleaching detergents and additives occasionally.
Investigating malfunctions What might be the cause of… Defects you can remedy yourself MALFUNCTION CAUSE REMEDY 1. Does not work on any programme Plug not in socket. Not switched on. Power failure. Fuse blown. Door open. Plug it in. Switch on. Check. Check. Close door. 2. Does not fill with water See cause 1. Tap turned off. Programme selector not correctly positioned. Check. Turn on tap. Position programme selector correctly. 3. Water does not drain away Kink in discharge hose.
SETTING UP + INSTALLATION Remove the polystyrene base and place the machine near its permanent position (diagram 1). 1 Carefully cut through the hose retaining clip at the rear of the appliance (diagram 2). Unscrew the central bolt (A); unscrew the 4 lateral screws (B) and remove the cross piece (C) (diagram 3). Lean the machine forward and remove the plastic bags containing the two polystyrene blocks at the sides, pulling downwards (diagram 4).
Note: we recommend you keep the transit bracket, braces and screws to immobilise the machine for future transit. The Manufacturers will not be responsible for any possible damage to the machine caused by not following the rules relating to releasing the mechanism. The user is responsible for all costs of installation. Water connection The appliance must be connected to the water mains using new hose-sets. The old hose-sets should not be reused.
...................................................................................................................................................................................................................... NOTES ...................................................................................................................................................................................................................... ..........................................................................
...................................................................................................................................................................................................................... ...................................................................................................................................................................................................................... ................................................................................
...................................................................................................................................................................................................................... ...................................................................................................................................................................................................................... ................................................................................
02.10 - 41006151.
