MICROWAVE OVEN Моdel: CMG2071M Owner's manual Please read these instructions carefully before installing and operating the oven. Record in the space below the SERIAL NO. found on the nameplate on your oven and retain this information for future reference. By placing the CE marking on this product, we declare, on our own responsibility, compliance to all of European safety, health and environmental requirements stated in the legislation for this product.
PRECAUTIONS TO A VOID POSSIBLE EXPOSURE TO EXCESSIVE MI CROW A VE ENERGY 1. Do not attempt to operate this oven with the door open since open door operation can result in harmful exposure to microwave energy. It is important not to defeat or tamper with the safety interlocks. 2. Do not place any object between the oven front face and the door or allow soil or cleaner residue to accumulate on sealing surfaces. 3. Do not operate the oven if it is damaged.
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliance basic safety precautions should be followed, including the following: WARNING: To reduce the risk of burns, electric shock, fire, injury to persons or exposure to excessive microwave energy: 1. Read all instructions before using the appliance. 2. Use this appliance only for its intended use as described in this manual. Do not use corrosive chemicals or vapors in this appliance. This type of oven is specifically designed to heat, cook or dry food.
INSTALLATION 1. 2. 3. 4. Make sure that all the packing materials are removed from the inside of the door. WARNING: Check the oven for any damage, such as misaligned or bent door, damaged door seals and sealing surface, broken or loose door hinges and latches and dents inside the cavity or on the door. If there is any damage, do not operate the oven and contact qualified service personnel.
2. 3. outlet, wait 10 seconds, and plug it in again securely. Check for a blown circuit fuse or a tripped another appliance. Check to ensure that the control panel is 4. programmed correctly and the timer is set. Check to ensure that the door is securely closed engaging the door safety lock system. Otherwise, the microwave energy will not main circuit breaker. If these seem to be flow into the oven.
7. Grill Heater 8. Metal Rack CONTROL PANEL The control panel consists of two function operators. One is a timer knob, and another a power knob. POWER/ACTION SELECTOR You use this operator knob to choose a cooking power level. It is the first step to start a cooking session. TIMER KNOB Offers visual timing settings at easy turn of your thumb to select a desired cooking time up to 30 minutes per cooking session.
To set a cooking program 1. Place food in oven and close the door. 2. Turn Power/Action Selector to select a power level or cooking function. 3. Use Timer knob to set a cooking time timer past 2 minutes and then return to the correct time. CAUTION: ALWAYS RETURN TIMER BACK TO ZERO POSITION if food is removed from oven before the set cooking time is complete or when oven is not in use. To stop oven during cooking process, push the door release button or open the door by the handle.
local city office, your household waste disposal service or the shop where you purchased the product.