2 4 3 5 6 A A B B C C D D CI633DC E E F F A 2018-01 210*290MM; G G PN:** Candy-MC-IT7117B1C-A （MC-IT7116B1C-A） CI633DC H H 1:1 K 20200701 1 2 1 1 3 4 5 6
CI633DC
EN-2
EN-3 ENGLISH
EN-4
EN-5 ENGLISH
EN-6
EN-7 ENGLISH
Touch the ON/OFF control for three seconds. After power on, the buzzer beeps once, all displays show “–” or “– –”, indicating that the induction hob has entered the state of standby mode. Place a suitable pan on the cooking zone that you wish to use. • Make sure the bottom of the pan and the surface of the cooking zone are clean and dry. Select a heat setting by touching the “-” or “+” control. • If you don’t choose a heat setting within 1 minute, the Induction hob will automatically switch off.
ENGLISH Turn the cooking zone off by scrolling down to “0” or touching “-” and “+” control together. Make sure the display shows “0”. Turn the whole cooktop off by touching the ON/OFF control. Beware of hot surfaces H will show which cooking zone is hot to touch. It will disappear when the surface has cooled down to a safe temperature. It can also be used as an energy saving function if you want to heat further pans, use the hotplate that is still hot.
Touching the “-” button to cancel the Boost function, then the cooking zone will revert to level 9. Touching “-” and “+” control together. The cooking zone switch off and the boost function cancel automatically The function can work in any cooking zone. The cooking zone returns to its original setting after 5 minutes. You can lock the controls to prevent unintended use (for example children accidentally turning the cooking zones on).
When the hob is in the pause mode, all the controls are disable except the ON/OFF , you can always turn the induction hob off with the ON/OFF control in an emergency. The hob will shut down after 10min if you don’t exit the pause mode. it is possible to set a maximum power absorption level for the induction hob, choosing up to different power ranges. induction hobs are able to limit themselves automatically in order to work at lower power level, to avoid the risk of overloading.
You can use the timer in two different ways: You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when the set time is up. You can set it to turn one or more cooking zones off after the set time is up. The timer of maximum is 99 min. Make sure the cooktop is turned on. Note: you can use the minute minder even if you’re not selecting any cooking zone. Touch “+” the controls of the timer.
ENGLISH Setting the timer to turn one zone off Touch the “-” or “+” of the corresponding cooking zone you want to set the timer for. Set the time by touching the or control of the timer Hint: Touch the “-” or “+” control of the timer once will decrease or increase by 1 minute. Touch and hold the “-” or “+” control of the timer will decrease or increase by 10 minutes. Touching the “-” and “+” together, the timer is cancelled, and the “00” will show in the minute display.
Selection of cooking vessels Iron oil frying Stainless steel Iron pan Iron kettle Enamel Enamel cooking stainless steel utesil kettle Iron plate You may have a number of different cooking vessels 1. This induction hob can identify a variety of cooking vessels, which you can test by one of the following methods: Place the vessel on the cooking zone. If the corresponding cooking zone displays a power level, then the vessel is suitable.
ENGLISH 5. If the ferromagnetic part covers only partially the base of the pan, only the ferromagnetic area will heat up, the rest of the base may not heat up a sufficient temperature for cooking. 6. If the ferromagnetic area is not homogeneous, but presents others material such as aluminum this may affect the heating up and the pan detection. If the base of the pan is similar to the pictures below the pan could be not detected.
EN-16
EN-17 ENGLISH
EN-18
ENGLISH Product Information for Domestic Electric Hobs Compliant to Commission Regulation (EU) No 66/2014 Position Symbol Model identification Type of hob: Number of cooking zones and/or zones areas areas Induction cooking zones Heating technology (induction Induction cooking cooking areas cooking zones and cooking areas, radiant cooking zones radiant cooking zones, solid plates) solid plates For circular cooking zones or areas: diameter of useful surface area per electric heated cooking zone, rounded t
