Installation Guide

ManualsBrandsCandy ManualsAppliancesCDI1LS38S Full Size Integrated Dishwasher - White

Page 1

INSTALLATION GUIDE

Built-in Dishwasher

INSTALLATION PREPARATION

STEP ONE

WARNING

ATTENTION

Electrical Shock Hazard

Disconnect electrical power before installing dish-

washer.

Failure to do so can result in death or electrical shock.

The installation of the pipes and electrical equipments

should be done by professionals.

Choose a place near the sink to facilitate the

installation of inlet and drain hoses (see fig 1).

The installation position of dishwasher should be near

the existing inlet and drain hoses and power cord.

One side of the cabinet sink should be chosen to fac-

ilitate the connection of drain hoses of the dishwasher.

Please check the accompanying installation access-

ories (hook for aesthetic panel,screw).

Illustrations of cabinet dimensions and installation

positionof the dishwasher. Preparations should be

made before moving the dishwasher to the installation

place.

(Fig 1)

Cabinet dimensions Less than 5mm between the

top of the dishwasher & cabinet and the outer door

aligned to cabinet.

Figure 2 - Minimum space when the door is opened

Summary of content (4 pages)

PAGE 1
INSTALLATION GUIDE Built-in Dishwasher ! WARNING INSTALLATION PREPARATION The installation position of dishwasher should be near the existing inlet and drain hoses and power cord. One side of the cabinet sink should be chosen to facilitate the connection of drain hoses of the dishwasher. Electrical Shock Hazard Please check the accompanying installation accessDisconnect electrical power before installing dishories (hook for aesthetic panel,screw). washer.
PAGE 2
INSTALLATION GUIDE Built-in Dishwasher AESTHETIC PANELS DIMENSIONS & INSTALLATION Figure 4B Installation of aesthetic wooden panel STEP ONE (Fig 3) The aesthetic panel should be processed in accordance with the illustrated dimensions (unit: mm) Install the hook on the aesthetic wooden panel & put the hook into the slot of the outer door of dishwasher (see fig 4A). After positioning of the panel , fix the panel onto the outer door by screws and bolts (fig 4B).
PAGE 3
INSTALLATION GUIDE Built-in Dishwasher CONNECTION OF DRAIN HOSES STEP ONE Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it run into the sink, making sure to avoid bending or crimping it. The top of the hose must be less than 1000mm. 6) Affix the condensation strip under the work surface of cabinet. Please ensure the condensation strip is flush with edge of work surface. 7) Place the dishwasher into position.(Illustration 4) 8) Level the dishwasher.
PAGE 4
INSTALLATION GUIDE Built-in Dishwasher ABOUT ELECTRICITY CONNECTING WARNING ! For personal safety: Do not use an extension cord or an adapter plug with this appliance. Do not, under any circumstances, cut or remove the earthing Connection from the power cord. ELECTRICAL REQUIREMENTS Please look at the rating label to know the rating volage and connect the dishwasher to the appropriate power supply.