User Manual
Table Of Contents
- user manual for classic hood_EN.pdf
- user manual for classic hood_it
- user manual for classic hood_fr
- user manual for classic hood_es
- user manual for classic hood_pt
- user manual for classic hood_pl
- user manual for classic hood_cs
- user manual for classic hood_sl
- user manual for classic hood_sk
- user manual for classic hood_gr
- user manual for classic hood_hu
- user manual for classic hood_ro
- user manual for classic hood_hr
- user manual for classic hood_ru
- user manual for classic hood_uk
If you have an outlet to the outside, your cooker hood can be connected as below
picture by means of an extraction duct (enamel, aluminum, flexible pipe or
inflammable material with an interior diameter of 150mm)
INSTALLATION (VENT OUTSIDE)
1. Before installation, turn the unit off and unplug it from the outlet.
2. The cooker hood should be placed at a distance of 70~80cm above the
cooking plane for best effect.
3. Drill 3 holes to accommodate the wall bracket. Screw and tighten the wall
bracket onto the wall with the screws (4mm x 40 mm) and wall plugs provided.
Screw
(4mm x 40mm)
Wall plug
Wall bracket
8