User Manual

Table Of Contents

Place the chimney on the cooker hood and determine the location of plate I and II.

Drill holes to accommodate plate I & II.

Fix plate II on the wall by two screws (4mm x 40mm) and wall plugs.

6. Take out the chimney from the cooker hood Attach the exhaust pipe onto the

one-way-valve as shown below.

7. Put the chimney back to the cooker hood. Before lifting the chimney on the

desired height, fix plate I on the wall by two screws (4mm x 40mm) and wall

plugs. Lift up the chimney to the desired height and fix the chimney on the

plate II by 2 screws (4mm x 8mm)

Fix the lower chimney on the cooker hood by 2 screws (4x8mm)