INSTRUCTIONS MANUAL REFRIGERATOR CCBF5182WWK CCBF5182AWK CCBF5182BWK
Thank you for purchasing this product. Before using your refrigerator, please carefully read this instruction manual in order to maximize its performance. Store all documentation for subsequent use or for other owners.
SAFETY INFORMATION The refrigerator contains a refrigerant gas (R600a: isobutane) and insulating gas (cyclopentane), with high compatibility with the environment, that are, however, infl ammable. We recommend that you follow the following regulations so as to avoid situations dangerous to you: Before performing any operation, unplug the power cord from the power socket. The refrigeration system positioned behind and inside the Wine Coolers contains refrigerant.
avoid damaging the tubes. If in the refrigeration system a leak is noted, do not touch the wall outlet and do not use open flames. Open the window and let air into the room. Then call a service centre to ask for repair. Do not scrape with a knife or sharp object to remove frost or ice that occurs. With these, the refrigerant circuit can be damaged, the spill from which can cause a fire or damage your eyes.
heaters or inflammable materials. Do not use extension cords or adapters. Do not excessively pull or fold the power cord or touch the plug with wet hands. Do not damage the plug and/or the power cord; this could cause electrical shocks or fires. It is recommended to keep the plug clean, any excessive dust residues on the plug can be the cause fire. Do not use mechanical devices or other equipment to hasten the defrosting process.
oil lamps and the like in order to speed up the defrosting phase. Do not use or store inflammable sprays, such as spray paint, near the Wine Coolers. It could cause an explosion or fi re. Do not use electrical appliances inside the food storage compartments, unless they are of the type recommended by the manufacturer. Do not place or store inflammable and highly volatile materials such as ether, petrol, LPG, propane gas, aerosol spray cans, adhesives, pure alcohol, etc.
materials in the Wine Coolers. When the material that requires a strict control of storage temperatures is to be stored, it is possible that it will deteriorate or an uncontrolled reaction may occur that can cause risks. Maintain the ventilation openings in the appliance enclosure or in the built-in structure, free of obstruction. Do not place objects and/or containers filled with water on the top of the appliance. Do not perform repairs on this Wine Coolers.
This appliance can be used by children aged from 8 years and above and by persons with reduced physical, sensory or mental capabilities or with a lack of experience and knowledge; provided that they have been given adequate supervision or instruction concerning how to use the appliance in a safe way and understand the hazards involved. Children should not play with the appliance.
SCRAPPING OLD APPLIANCES This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used). It is important to have WEEE subjected to specific treatments, in order to remove and dispose properly all pollutants, and recover and recycle all materials.
Energy Saving For better energy saving we suggest : Installing tge appliance away from heat sources and not exposed to direct sunlight and in a well ventilated roo. Avoid putting hot food into the refrigerator to avoid increasing the internal temperature and therefore causing continuos functionaliting of the compressor. Do not excessively stuff foods so as to ensure proper air circulation. Defrost the appliance in case there is ice to facilitate the transfer of cold.
CONTENTS Safety Information Safety Instructions Meaning of safety warning symbols ················· ···························· 4 Electricity related warnings ··························· ······························ 5 Related warnings for use ················ ························ ··············· ············· 5 Warnings related to placing items ·················· ·· ·········· ·· · ·· ·········· ·· 6 Introduction Names of components ······························· ····· ··························· 7
Thank you for purchasing this product. Before using your refrigerator, please carefully read this instruction manual in order to maximize its performance. Store all documentation for subsequent use or for other owners.
Meaning of safety warning symbols Prohibitio n symbols The symbols indicate prohibited matters, and those behaviors are forbidden. Non-compliance with the instructions may result in product damages or endanger the personal safety of users. The symbols indicate matters that must be followed, and those behaviors must be strictly executed in line with the operation requirements. Non-compliance with the instructions may result in product damages or endanger Warning symbols the personal safety of users.
Electricity related warnings Do not pull the power cord when pulling the power plug of the refrigerator. Please firmly grasp the plug and pull out it from the socket directly. Do not damage the power cord under any condition so as to ensure safety use, do not use when the power cord is damaged or the plug is worn. Worn or damaged power cord shall be replaced in manufacture-authorized maintenance stations.
Do not allow children to enter or climb the refrigerator to prevent that children are sealed in the refrigerator or children are injured by the falling refrigerator. Do not spray or wash the refrigerator; do not put the refrigerator in moist places easy to be splashed with water so as not to affect the electrical insulation properties of the refrigerator.
Names of components Thermostat button Light Upper tray Glass shelf Water dispenser Vegetable basket Lower tray F drawer Adjustable wheel Refrigerating chamber The Refrigerating chamber is suitable for storage of a variety of fruits, vegetables, beverages and other food consumped in the short term. Cooking foods shall not be put in the refrigerating chamber until cooled to room temperature. Foods are recommended to be sealed up before putting into the refrigerator.
Thermosta t The temperature selector knob is located on the right hand side wall of the refrigerator interior Setting“Off”：UnitOff Setting“Min”：Less Cool Temperature Setting“Med”：Normal Operation(adequate for most situations) Setting“Max”：Coolest Temperature When environment temperatures is high (e.g. on hot summer days), if the thermostat setting is Coolest (positioning MAX), the compressor runs continuously.
Cleaning Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the cooling effect and energy saving. The interior of the refrigerator should be cleaned regularly to avoid odor. Soft towels or sponge dipped in water and non-corrosive neutral detergents are suggested for cleaning. The freezer of shall be finally cleaned with clean water and dry cloth. Open the door for natural drying before the power is turned on.
The following simple issues can be handled by the user. Please call the after-sale service department if the issues are not settled. Inoperation Odor Whether the product is plugged and connected to power; Failure power or tripping circuit Odorous foods should closely wrapped; Whether foods are rotten; Whether the interior shall be cleaned. Whether the thermostat is over adjusted; Foods in the refrigerating Whether foods containing water is put in inside the chamber are frozen glass partition.
Door install guidelines about swapping left&right Screw cap (four) Catch (two) 1. Remove the four screw caps and two catches with the even- slot screwdriver.Then disassemeble the screws top the fixed roof with the cross-slot screwdriver. 2. Remove the screws fixed the top-hinge with cross-slot screwdriver. Screw（three） 3. Replace the top-hinge and the top-door limit block and the door bearing bush to the other side. A.Remove the nut with sleeve.
12
Door install guidelines about swapping left&right 10、Set the top door right position,fix the top-hinge and the cover. 11、Install the four screw caps and two catches to corresponding position. ·Ensure the Appliance is unplugged and empty. ·Adjust the two leveling feet to their highest position. ·We recommend you have someone to assist you. 12、replace the leveler to the other side and adjust it to make sure the cabinet level Attachment： 1.
Scrapping old appliance By ensuring that this product is properly disposed of, you will help prevent potential negative consequences for the environment and human health, which could otherwise arise due to inappropriate waste handling of this product on reaching the end of its working life.
INSTRUCTIONS FOR THE WATER DISPENSER 1. The water dispenser can be used only for purified water.Hot water,soft drinks containing carbon dioxide such as cola,fruit juice,etc.are not applicable; 2. The water injection by taking down the water box from the door is not allowed; 3. The maximum water injection rate shall be lower than the maximum scale indicated on the water box; 4. In case of failure of water taking, please inspect if the water box is normally located on its base; 5.
Attentions: 1. Only purified water and cool water without any impurities can be used for water dispenser. The hot water and soft drink with carbon dioxide, likes cola, apple juice and so on can not be used; 2. The water injection by taking down the water box from the door is not allowed; 3. The maximum water injection rate shall be lower than the maximum scale indicated on the water box; 4. Do not knock on the bottle frame in upward side during the filling of water. Water taking and drinking: 1.
Instructions for water dispenser disassembly and cleaning I. Disassembly 1. Take out the water tank components To pull out the water tank components in the direction of 45°of oblique upward by hands that are closely attached on the two sides of the water tank components, when the lower parts of water tank components are separated from the water valve components, the water tank components can be taken out through horizontal movement (to the direction of user); 2. Take down the sealing ring of water tank 3.
Attentions: Make sure that the water tank is empty before moving it. 1. The water valve components are non-detachable; II. Cleaning 1. To disassemble the water tank, water tank cover, sealing ring and water valve; 2. Use cold or warm water to cleaning the components of water dispenser. 3. Wipe it with dry cloth. Attentions: 1.
3. Installation of water tank components The hanging slot on the water tank components shall be in alignment with the suspension loop on the inner layer, and the sealing ring at the bottom of water tank shall be in alignment with the entrance of water value components, and then insert them into the corresponding positions in the direction of 45° of oblique downward by hands. Cleaning of water receiving tank Use wet cloth to wipe it and then use the dry cloth.
TIPS FOR ENERGY SAVIN Tips for energy saving Try not to open the door too often, especially when the weather is wet and hot. Once you open the door, close it as soon as possible. Every now and then check if the appliance is sufficiently ventilated (adequate air circulation behind the appliance). In normal temperature conditions, please arrange the thermostat at the middle setting. Before loading the appliance with packages of fresh food, make sure they are cooled to ambient temperature.
