Operation Manual

20
21
ENGLISH
ADJUSTING THE CHRONOGRAPH
HANDS TO ZERO POSITION
Example:
One or several chronograph hands are not
in their correct zero positions and have
to be adjusted (e.g. following a battery
change).
Pull out the crown to position II (all 3
chronograph hands are in their correct
or incorrect zero position).
Keep push-buttons A and B depressed
simultaneously for at least 2 seconds
(the centre stop-second rotates by
360°
corrective mode is activated).
Push button A
Minute counter
Push button B
1
/
10
second counter
Centre stop-sencond
Returning the crown to position I
Termination of the chronograph
hands adjustment (can be carried
out at any time).
Adjusting the centre stop second
Single step A 1 x short
Continuous A long
Adjusting the next hand B
Adjusting the
1
/
10
second counter
hand (position 6h)
Single step A 1 x short
Continuous A long
Adjusting the next hand B
Adjusting the minute counter
(position 9h)
Single step A 1 x short
Continuous A long