Installation Instructions

M630212 M630217 M630218
Antibacterial Recessed Downlight
Installation Instructions
READ AND FOLLOW ALL SAFETY INSTRUCTIONS!
SAVE THESE INSTRUCTIONS AND DELIVER TO
OWNER AFTER INSTALLATION
• To reduce the risk of death, personal injury or property
damage from fire, electric shock, falling parts,
cuts/abrasions, and other hazards please read all
warnings and instructions included with and on the
fixture box and all fixture labels.
• Before installing, servicing, or performing routine
maintenance upon this equipment, follow these
general precautions.
• Installation and service of luminaires should be
performed by a qualified licensed electrician.
• Disconnect or turn off power before installation or
servicing. Verify that supply voltage is correct by
comparing it with the luminaire label information.
• Make all electrical and grounded connections in
accordance with the National Electrical Code (NEC)
and any applicable local code requirements. All wiring
connections should be capped with UL approved
recognized wire connectors.
• Wear gloves and safety glasses at all times when
removing luminaire from carton, installing, servicing or
performing maintenance.
PACKAGING CONTENT
Before beginning installation on this product, make sure all
parts are present. Compare parts with package contents
list and diagram as below. If any part is missing or
damaged, do not attempt to assemble, install or operate
this product.
INSTALLATION
Before beginning the installation, make sure all power is
off, shutting power off in breaker box to areas where
downlights are to be installed is recommended. Required
Tools (not included): Safety glasses and gloves.
1. Install the E26 pigtail adapter into the recessed CAN
socket. See Figure 1
2. Connect the Orange connectors together
3. Pull up both Torsion spring arms of the retrofit trim
together and align them inside the housing retaining
bracket. Gently push up trim and torsion springs so
they begin to expand and lift trim in place (Figure 2)
4. Turn the power on
Power On/Off Light Colors
1. Power On Warm-white
2. Power Off Light Switch Off
3. Power On
Violet Blue
(Disinfection mode)
HOW TO TOGGLE LIGHT COLOR TO
DISINFECTION MODE?
During normal use of this antibacterial downlight, the
light color always remains at warm-white when power is
switch on. To activate the disinfection light, switch the
light on and off and then on again consecutively.
Questions, problems, missing parts
Before returning to your retailer, call our
customer service at 1-800-223-3055
Monday to Friday 8:00AM to 4:00PM PM PT
Email: [e-mail]
Tips:
To keep your rooms and premises away from microbial
buildup, turns on the violet blue light for 8 hours a day.
WARRANTY INFORMATION
This product is warranted for 5 years from the date of
purchase. If this product does not perform to the
specifications supplied on this package, send
an email or write to the address below for product
return and replacement. This replacement is the sole
remedy available. Visit www.candexlighting.com for
full warranty details.
SAFE FOR HUMAN EXPOSURE
This light, emits no UV energy, abides by IEC
photobiological safety standard 62471. It causes
no harms to humans skin, eyes and pets
Components included
1. Recessed downlight
2. Pigtail E26 adapter
3. Instruction sheet
(Figure 1)
(Figure 2)