Use and Care Manual

1
3
2, 6
9
11
4
8
12
5
7
10
1. Motor module
2. Motor exhaust (back of unit)
3. Hose inlet
4. Dirt container (contains
Mounting bracket - Fig. 2-1
and tools - Fig. 3-2)
5. ON-OFF switch
6. Power cord (back of unit)
7. Rating label
8. Mounting bracket
(packed inside dirt container)
9. Hose rack
10. Tools
11. Tool caddy
12. Hose (L2310 - 30ft.; L2315 - 35ft.)
Operate the power unit only at the
voltage specified on the rating label
(Item 7).
This system is intended for household
use.
Grounding
Instructions
This appliance must be grounded. If it
should malfunction or breakdown,
grounding provides a path of least
resistance for electrical current to
reduce the risk of electric shock. This
appliance is equipped with a cord
having an equipment-grounding
conductor (A) and grounding plug (B).
The plug must be plugged into an
appropriate outlet (C) that is properly
installed and grounded in accordance
with all local codes and ordinances.
DANGER-
Improper connection of the equipment
grounding conductor can result in the
risk of electric shock. Check with a
qualified electrician or service person if
you are in doubt as to whether the outlet
is properly grounded. Do not modify
the plug provided with the appliance -
if it will not fit the outlet, have a proper
outlet installed by a qualified electrician.
This appliance is for use on a nominal
120 volt circuit and has a grounding
plug that looks like the plug illustrated in
Fig. 1.1.
A Temporary adapter (D) may be used
to connect this plug to a 2-pole recepta-
cle (E) if a properly grounded outlet is
not available. The Temporary adapter
should be used only until a properly
grounded outlet (C) can be installed by
a qualified electrician. The green col-
ored rigid ear (F), lug, or the like extend-
ing from the adapter must be connected
to a permanent ground such as a
properly grounded outlet box cover.
Whenever the adapter is used, it must
be held in place by a metal screw (G).
NOTE: In Canada, the use of a tempo-
rary adapter is Not Permitted by the
Canadian Electrical Code.
ATTENTION:
1-1
1-2
1.ASSEMBLY
1-3