Datasheet

7
Fast Ethernet (Standard) UTP to Fiber Converters
CCM-124X – Standard multi-mode & single-mode series: 100BASE-TX to 100BASE-FX
Canary’s Fast Ethernet Media Converters connect twisted-pair and
fiber optic segments to extend Fast Ethernet links. They are ideal
for connecting user desktops with low-cost work-group switches
and servers; or for switch-to-switch links. Canary’s UTP-to-Fiber
Media Converters are used to economically distribute Fast Ethernet
capacity to user desktops throughout the network.
CCM-124X converter modules are the first in the industry to speedup
Spanning Tree link recovery by employing Link Fault Signaling (LFS)
technology while supporting Far-End Fault-Indication and parallel
detection.
•
Card features and performance mirror that of Canary’s
stand-alone CFT 100 Mbs copper-to-fiber converters
•
Switch for Hard-Setting Full-Duplex or 100BASE-T
Autonegotiation for 100 Mbs, Full and Half-duplex operation
•
Internal Auto-sensing, MDI / MDI-X crossover switch for
proper Network Interface Card or Switch connections
•
Switch enabled Link Fault Signaling (LFS) – forwards lost
link awareness to each connected host
•
A full array of status / diagnostic LEDs
•
Additional models include: Single-Fiber Bi-Directional
single-mode and versions launching ITU-specified CWDM
transmitter wavelengths
Ordering Information
Model Media Min. Tx Max. Tx Rx Min. PWR Max.PWR Max. Input Connector Wavelengths Transmit
Numbers Types PWR PWR Sensitivity Budget Budget PWR Type (ηm) Distance
CCM-1241 UTP / MM -20.0 dBm -14.0 dBm -31.0 dBm 11.0 dB 17.0 dB -8.0 dBm SC 1310 ηm 2000 m
CCM-1242 UTP / MM -20.0 dBm -14.0 dBm -31.0 dBm 11.0 dB 17.0 dB -8.0 dBm ST 1310 ηm 2000 m
CCM-1246 UTP / MM -19.0 dBm -14.0 dBm -32.0 dBm 13.0 dB 18.0 dB -8.0 dBm LC 1310 ηm 2000 m
Specifications above in blue are for multi-mode, fiber connectors. Specifications below for single-mode, fiber connectors.
CCM-1281-SM UTP / SM -16.0 dBm -9.0 dBm -34.0 dBm 18.0 dB 25.0 dB -7.0 dBm SC 1310 ηm18 Km
CCM-1241-SM UTP / SM -15.0 dBm -8.0 dBm -34.0 dBm 19.0 dB 26.0 dB -7.0 dBm SC 1310 ηm 30 Km
CCM-1242-SM UTP / SM -15.0 dBm -8.0 dBm -34.0 dBm 19.0 dB 26.0 dB -7.0 dBm ST 1310 ηm 30 Km
CCM-1246-SM UTP / SM -15.0 dBm -8.0 dBm -28.0 dBm 13.0 dB 20.0 dB -8.0 dBm LC 1310 ηm 20 Km
CCM-1241-LSM UTP / SM -5.0 dBm 0.0 dBm -35.0 dBm 30.0 dB 35.0 dB 0.0 dBm SC 1310 ηm 50 Km
CCM-1241-XL UTP / SM -5.0 dBm 0.0 dBm -35.0 dBm 30.0 dB 35.0 dB 0.0 dBm SC 1550 ηm 80 Km
CCM-1241-E85 UTP / SM -5.0 dBm 0.0 dBm -35.0 dBm 30.0 dB 35.0 dB 0.0 dBm SC 1550 ηm 80 Km
*NOTE 1: CCM-124X models are available as uni-Directional (D) versions that allow one-way traffic e.g. CCM-1241D. For special order, contact Canary for information.
* NOTE 2: CCM Chassis converters are available as card modules designed for Canary’s CCN-2000 / CCN-0400 Chassis models and as standalone units.
Please refer to the CCN-2000 / CCN-0400 Data Sheets or 100 Mb, UTP-to-Fiber Data Sheet for additional information
More versions of the CCM-124X series may be found on the Canary web site as they become available.