Datasheet

11
Gigabit Ethernet UTP-to-Single Fiber Converters
CCM-1037A/B – Gigabit Ethernet UTP-to-Single-Fiber, Bi-Directional Single-Mode
Canary CCM-1037A and CCM-1037B Gigabit Ethernet UTP-to-
Single-Fiber converters are available with 20 kilometer and 40
kilometer transmission ranges. They function identically to units with
standard duplex fiber connectors … and must be connected as
complementary A & B units.
•
1000BASE-T Autonegotiation for Full-duplex and Half-
duplex operation with Flow-Control and;
•
1000BASE-z Fiber Specifications
•
Switch selectable, Fiber-Port Autonegotiation for common,
end-to-end link awareness and Flow-Control, or for
independent connection to Gigabit fiber ports on older
switches
•
Internal Auto-sensing, MDI / MDI-X crossover switch for
Network Interface Card or Switch connections
•
Uses Single-Fiber, single-mode connectors operating on
1550 ηm and 1310 ηm wavelengths
•
Transparent to Flow-Control commands such as PAUSE
•
A full array of status / diagnostic LEDs
Ordering Information
Model Media Min. Tx Max. Tx Rx Min. PWR Max.PWR Max. Input Connector Wavelengths Transmit
Numbers Types PWR PWR Sensitivity Budget Budget PWR Type (ηm) Distance
CCM-1037A UTP / SM -8.0 dBm -3.0 dBm -21.0 dBm 13.0 dB 18.0 dB -3.0 dBm SC 1550/1310 20 Km
CCM-1037B UTP / SM -8.0 dBm -3.0 dBm -21.0 dBm 13.0 dB 18.0 dB -3.0 dBm SC 1310/1550 20 Km
CCM-1037E4A UTP / SM -3.0 dBm 2.0 dBm -23.0 dBm 20.0 dB 25.0 dB -3.0 dBm SC 1550/1310 40 Km
CCM-1037E4B UTP / SM -3.0 dBm 2.0 dBm -23.0 dBm 20.0 dB 25.0 dB -3.0 dBm SC 1310/1550 40 Km
* NOTE: CCM Chassis converters are available as card modules designed for Canary’s CCN-2000 / CCN-0400 Chassis models and as standalone units.
Please refer to the CCN-2000 / CCN-0400 Data Sheets or Gigabit Ethernet Single-Fiber, UTP-to-Fiber Data Sheet for additional information
More versions of the CCM-1037A/B series may be found on the Canary web site as they become available.